About This

• Wireless Design: You just need to connect the monitor to the lighter charger, connect the backup camera to running light or reversing light. No additional wiring is required, making installation is easier and faster.
• The Extra Camera Only for System Use. Customers without AWT7 or AWTL7, pls do not order it.
• Way to Add Extra Camera: 1. Install the antennas to the monitor, then power it on through car charger or dc power supply cable
• 2. Install the camera in your lisence plate through the dc power supply cable to power it on
• 3. Change the view to split from the Setting-Mode, back to the view to check it is split view on the screen. Press the button "V1/V2" and switch to the view of second channel needs to pair.
• 4.Please power off the first camera before pairing the second one to avoid signal interference. Click the "MENU" button on the monitor and then click "Pairing" through the circle button to start pair
• 5.The monitor will start to cut down and then pair to the second camera

Overview

• Brand : eRapta
• Screen Size : 7 Inches
• Product Dimensions : 2.13"L x 1.26"W x 1.3"H
• Compatible Devices : Monitor
• Installation Type : Surface Mount
• Voltage : 12 Volts
• Optical Sensor Technology : CMOS
• Lens Type : Wide Angle
• Real Angle of View : 150 Degrees
• Connector Type : DC power connector